Do not open coolant circulation system. Removing First determine whether a coded radio is installed. If so, determine the correct coding. Switch ignition off and disconnect battery Ground (GND) strap. Remove bolts (arrows) and remove engine covers -A- and -B-. Remove cover above air filter. Remove plenum cover. Remove sound-proofing material (arrows). Remove bracket for sound-proofing at unit support. Drain engine coolant => page 19-19 Remove front bumper: => Repair Manual, Body Exterior, Repair Group 63 Remove lock carrier: => Repair Manual, Body Exterior, Repair Group 50.
To loosen ribbed belt, turn clockwise using 17 mm box wrench until two holes are aligned (arrow). Counter-hold in position using 3204 drift. Remove pressure hoses (arrows) from charge air cooler to left and right pressure lines. Disconnect cable at B+ on battery. Disconnect B+ battery cable. Remove wiper arms (arrows). Disconnect retaining clip -1- at water deflector. Pull off left and right retaining clips -3- on water deflector.
Tidak ada komentar:
Posting Komentar